Pages: 1
Posted on 05-04-19, 09:42 am


Karma: 13
Posts: 9/15
Since: 04-21-19
(Sorry for my bad english but im italian)
I was wondering if there was a way to make the pipes move like in NsmbWII
Posted on 05-04-19, 10:23 am
Administrator

Karma: 7323
Posts: 1476/1477
Since: 06-09-12
There is no sprite for that in NSMBDS.
_________________________
GitHub - Kuribo64 - YouTube
Posted on 05-11-19, 03:06 pm
Red Super Koopa
Available on all current platforms.

Karma: 1793
Posts: 869/877
Since: 02-12-16
you definitely could do moving pipes by remodelling some moving platform but you wouldn't be able to enter them.
_________________________
Nothing to say, so jadnjkfmnjamnfjkldnajfnjkanfjdksan jsdnvj m.

Posted on 05-12-19, 04:18 pm


Karma: -20
Posts: 44/49
Since: 10-17-18
poudink, if you put a warp at every 1/2 pixel you can always enter the pipe. (Ita: se metti un ingresso ogni mezzo pixel potrai sempre entrare nel tubo)
_________________________
I'm working on a new project!
Posted on 05-12-19, 04:27 pm


Karma: 13
Posts: 11/15
Since: 04-21-19
Ok, but were is the texture of the moving wall?
Posted on 05-13-19, 11:29 pm
Goomba


Karma: 99
Posts: 27/27
Since: 07-13-18
root -> enemy -> z_lift.nsbtx
Posted on 05-14-19, 02:00 am
Super Koopa
Swagmaster

Karma: 971
Posts: 830/832
Since: 04-24-18
Note, you will be sacrificing lifts, which is commonly used in level designs
___________________________________________________________


New Super Mario Bros. U DS:
https://nsmbhd.net/thread/4444-new-super-mario-bros-u-ds-demo-release/
Posted on 05-14-19, 04:30 pm


Karma: 13
Posts: 13/15
Since: 04-21-19
I have a problem in defining where the pipe points,
Posted on 05-14-19, 04:36 pm


Karma: -20
Posts: 46/49
Since: 10-17-18
? (you can also write italian if is difficult to translate)

_________________________
I'm working on a new project!
Posted on 05-14-19, 11:19 pm
Red Super Koopa
Available on all current platforms.

Karma: 1793
Posts: 872/877
Since: 02-12-16
I, uh, don't think using italian is allowed. for moving pipe joints, well, good luck. Since you already have the stone lifts retextured as pipes, the only option I can think of is to use the newer ds rotation controller to move a collisionless model of a pipe joint with a stone wall behind it for collision, also moved with rotation controller to avoid desyncs.
_________________________
Nothing to say, so jadnjkfmnjamnfjkldnajfnjkanfjdksan jsdnvj m.

Pages: 1