Pages: 1
Posted on 10-03-15, 02:50 am
I Am Not Inteligent

Karma: 979
Posts: 89/380
Since: 03-04-14
Hi everyone! I don't know if anyone knew about this problem. However, the warp entrance sprite has not been working (at least for me) when it is placed two or more tiles above/below the View. It looks kind of ugly to see Mario's head or feet when he's warping, so the sprite has to be placed two or three tiles from the warp, but, as I already said, it just stops working. What do I do?

I could not…
Posted on 10-03-15, 03:33 am
Red Paratroopa
Friend of N64s and DSes

Karma: 516
Posts: 41/171
Since: 07-26-15
What are the dimensions of the warp sprite? I am asking this since I think that it has to do with how far it can be from the view. I made a 1x2 warp sprite and it works fine when placed 5 tiles outside of the view.
_________________________
My Youtube Channel
Never use a flash drive unless you are transferring files...
Posted on 10-03-15, 07:00 am
Buster Beetle
Intérieurement fou... ou juste idiot?

Karma: 602
Posts: 469/473
Since: 07-27-13
Is the level using vertical scrolling?
If no, keep in mind that the DS screen is something like 3/4 of a ...square thing sized view height (use the view DS screen option on the editor, deh), if you put it directly over the view, no wonder you can't use it as the screen wouldn't allow Mario to go this high.
_________________________
STEAM ID: Nymphali Festif | SKYPE: superrainboom
Posted on 10-03-15, 08:18 am
Birdo


Karma: 2754
Posts: 1453/2091
Since: 06-26-11
There is a point below the view where Mario dies. You have to make sure Mario is warped before then. Try using the IF controller + the warp.
Posted on 10-03-15, 06:11 pm
I Am Not Inteligent

Karma: 979
Posts: 90/380
Since: 03-04-14
Posted by Arctus Platner
What are the dimensions of the warp sprite? I am asking this since I think that it has to do with how far it can be from the view. I made a 1x2 warp sprite and it works fine when placed 5 tiles outside of the view.

One of the levels' warp sprite dimensions are 1x6, the sprite is three tiles above the view and it should only work when you're climbing a vine. The other level's warp sprite dimensions are 2x2 and it is two tiles below the view. I don't really know why do they not work.
Posted by owthe.lat
Is the level using vertical scrolling?
If no, keep in mind that the DS screen is something like 3/4 of a ...square thing sized view height (use the view DS screen option on the editor, deh), if you put it directly over the view, no wonder you can't use it as the screen wouldn't allow Mario to go this high.

Both levels don't use vertical scrolling and I already knew the DS screen dimensions (4:3). The problem is that the sprite is there but it just won't work even if Mario touches it.
Posted by Hiccup
There is a point below the view where Mario dies. You have to make sure Mario is warped before then. Try using the IF controller + the warp.

I know that for sure. Mario dies if he falls three tiles below the screen gap, I think. Like I already said, the second level's warp sprite is located two tiles below the View. The first thing I actually tried was to use an IF (168) sprite in order not for it to be accessible again, but it didn't work. Then I changed the warp's dimensions and disabled the trigger event ID, nevertheless it didn't work either.
Even though, thank you all for trying to help me.

I could not…
Posted on 10-03-15, 06:51 pm (rev. 1 by Thierry on 10-03-15, 06:51 pm)
この記号は… 解読できないよ…


Karma: 6010
Posts: 1681/2719
Since: 01-17-13
If you can pass me the level privately, I can find you a fix. I've experienced problems somewhat close to yours in the past but even if I didn't, as long as I have the level, I'm almost sure can provide you a step by step fix or just send you back the level after fixing.

Feel free to accept or deny the offer.
Posted on 10-03-15, 08:27 pm
I Am Not Inteligent

Karma: 979
Posts: 91/380
Since: 03-04-14
I somehow managed to make the first level's warp sprite to work using by using the 198 and 199 sprites, but I couldn't make the other level's one to work, unfortunately. I'll PM you as soon as I can.

I could not…
Posted on 10-16-15, 03:08 pm
I Am Not Inteligent

Karma: 979
Posts: 94/380
Since: 03-04-14
Seems like it works when I expand the View so the sprite is inside of it.

I could not…
Pages: 1