Pages: 1
|
|
Posted on 08-19-11, 04:27 pm (rev. 2)
|
 Roy Koopa Karma: 4011 Posts: 432/2722 Since: 06-26-11 |
I know now why often the sprite 155 crashes!
See a lots of creative DS Hacking hereI was able to figure out two things: 1. If too many 155's are in one 16x16 box, it can freeze. So you can move your view, entrances and objects/sprites a bit away from the other 155's and it will work. 2. If "Destination area" is the same area on which you are warping around, it will freeze  That was all =) _________________________ If you want to support me, you might check out my Patreon Page : ) |
|
|
Posted on 08-19-11, 05:26 pm
|
 Super Mario( ͡° ͜ʖ ͡°) Karma: 10010 Posts: 648/4457 Since: 06-08-11 |
So you have to put "Destination Area" 0 if you want to go to the same area. Like in the entrances.
|
|
|
Posted on 08-20-11, 06:58 pm
|
|
Karma: 3752 Posts: 280/2112 Since: 06-28-11 |
Posted by Dirbaio So you have to put "Destination Area" 0 if you want to go to the same area. Like in the entrances. I knew that, but I did not know, that it froze, when too many 155s are in the same 16x16 block. Thanks a bunch ray. 
 
|
|
|
Posted on 08-20-11, 07:03 pm
|
|
Roy Koopa Karma: 4011 Posts: 454/2722 Since: 06-26-11 |
No problem
See a lots of creative DS Hacking here
_________________________ If you want to support me, you might check out my Patreon Page : ) |
Pages: 1